Hangzhou Suntech Machinery Co., Ltd. Support

How to replace hydraulic oil in rolling groove oil pump

2023-09-30

How to replace hydraulic oil in rolling groove oil pump - roll grooving machine 24inch -pipe grooving machine 12inch If the rolling groove machine has been used for a long time and the oil pressure is insufficient, it is necessary to replace the hydraulic oil in the oil pump. So how to replace it? ...

How to Cut Pipe and Tubing

2022-09-30

How to Cut Pipe and Tubing In plumbing systems, tubes and pipes can be formed of materials of different flexibility and density, such as PVC, PEX, cooper, galvanized steel and cast iron. When making plumbing repairs and improvements, use different pipe and tube cutters based on the type of material, ...

Differences between socket weld fittings and butt weld fittings

2023-08-15

There are various ways for pipes, fittings, flanges and valves to connect, socket weld and butt weld are the two popular. However, you might be confused about what are the differences between socket weld fittings and butt welding fittings, and which one would be best for your construction projects, ...

Measures to improve the production efficiency of electrofusion welders

2023-09-13

As a manufacturer of electrofusion welding equipment, only by doing a good job in the production and processing of mechanical equipment and ensuring that the produced mechanical equipment can have a higher quality and a relatively large quantity, can we do a good job in specific sales. Let machinery ...

The service life of the electric welding machine should be extended in this way

2023-10-19

Users who have purchased electrofusion welding equipment naturally hope that the mechanical equipment can have relatively good quality and performance, as well as a long service life. The quality and performance of the mechanical equipment is good, so it can have a relatively good performance in the ...

Design for Electrofusion Welding Machine

2022-10-30

The main factors that determine the welding quality by hot melt butt joint parameters are as follows: 1. The temperature when the heat is absorbed PE80 national standard 210 degrees / plus or minus 10 degrees. British standard 233 degrees / plus or minus 3 degrees; PE100 national standard 225 ...

Principle of hot melt welding machine

2022-09-16

The hot-melt welding machine adopts a plate-drawing structure and uses an electric heating method. The whole machine is in the form of a frame, composed of three plates: an upper template, a lower template, and a hot template, and is equipped with a hot mold and an upper and lower plastic cold mold. ...

Warning for Electrofusion Welding Machine

2021-10-08

Warning code and meaning warn! If a warning appears, the welding will be automatically aborted, which may cause wear of the pipe fittings. Ritmo S.p.A. declares that if the machine is dismantled privately after a warning, Ritmo will not be responsible. Power warning Warning 1- Power cord Possible ...

The factors that affect the welding quality of PPR water pipes, master these, hot melt water pipes will not leak water

2021-09-16

The factors that affect the welding quality of PPR water pipes, master these, hot melt water pipes will not leak water The worst thing about home decoration is the leaking of the newly installed water pipes. In fact, the water leakage problem of the water pipe is rarely caused by the quality of the ...